Welcome to the landing page EXCLUSIVELY for LMC Members. Below you will find an array of new and interesting products tailored to LMC Members needs. Take a moment to scroll through, and at the bottom of the page you will be able to locate your LMC BBI Representative.

Download the PPD Policy Here

BBI PROFERRED DRYWALL SCREWS

• Coarse and Fine Thread- 3/4” thru 6” Lengths.
• Manufactured and Tested to Demanding Standards.
• Manufactured by ISO 9001 Certified Taiwan Factory.
• Tighter Tolerance Phillips Drive for Superior Installation (2 Bits Included).
• Color Coded Packaging with Bilingual Labeling.

What We Do Differently

We source from a single, ISO 9001 Certified Taiwan Factory to make sure you are getting quality material that is consistent and traceable.

But we go further...

• Manufactured using premium grade wire, (2.65mm core material).
• H9 heading punch changed every (80,000m to 90,000m).
• Heading dies changed every (1m to 1.5m) creating a consistent, high quality head.
• Thread rolling dies changed (1m to 1.2m) for fine thread, (1.5m) for coarse thread ensuring superior thread sharpness on each and every screw.

What the PROS say...

“Proferred makes some simple, but profound changes, including a sharper tip to get the drive started. It’s the consistency in the quality that really sets them apart, though.

Changing the dies out earlier than necessary cost more, but it means you’ll get an exact fit every time".

- Pro Tool Reviews

Learn More Online Here

Download the Flyer Click Here

Proferred Collated Drywal and Self Drill Screws Image

Designed for ultimate performance, providing distributors with one of the fastest drilling, most consistent screws in today's demanding construction markets. Proferred screws are manufactured with a tighter drive tolerance, and extremely sharp points and threads, creating the ultimate performance screw for users.

MADE FOR CONSTRUCTION

Click on a link below to download flyers on each line of screws

COLLATED DRYWALL & SELF DRILL

DRYWALL & SELF DRILL

DECKING

CEMENT BOARD

For more info about BBI's full line of construction screws visit:

www.proferredscrews.com

BBI U.S. ANCHOR ULTRAWEDGE+ WEDGE ANCHORS

COMPETITIVE COMPARISONS

We are pleased to present ALL NEW competitive charts showing up-to-date technical performance comparisons of the Ultrawedge+ to our main competitors.

The charts outline the main metrics that industry specifiers are seeking on a regular basis; including tension resistance (pullouts) embedments and edge & spacing dimensions, utilizing the most current ICC-ES reports of record.

The comparison shows that the U.S. Anchor brand Ultrawedge+ has better performance in the all important tension resistance category, frequently requested by A&E's.

U.S. Anchor has one of the best wedge anchors in the industry, along with a "state of the art" and convenient ordering process, strong inventory position, competitive pricing, and great sales personnel to expedite your anchor needs.

Sell sheets, FAQ sheets and ICC-ES reports are available online at:
www.brightonbest.com/products

Learn More Online

Here

To view the Comparison Report click

Here

Click the Image Below to Download the Linecard

BBI U.S. ANCHOR TAPKING HD ANCHORS

BENEFITS:

• Pilot hole required; thread is created by the anchor during the installation process.
• No special drill bit required; install using standard-sized ANSI tolerance drill bits.
• Code listed under IBC/IRC in accordance with ICC-ES AC193 and ACI 355.2 for cracked and uncracked concrete.
• Qualified for static, wind and seismic loading conditions.
• Use for heavy duty loads.
• Anchor drill bit / length stamped on head of each anchor.
• Removable, leaving concrete surface flat. Ideal for temporary anchoring (e.g. formwork, bracing) or applications where fixtures may need to be moved.
• Suitable when reduced edge distances or spacing is required.
• Zinc plated coating.
• Triple thread makes installation more stable; patented thread design.
• High characteristic loads in both cracked and uncracked concrete.
• All listed sizes meet Category 1 Seismic Zone Qualification – Tension Zone – Cracked Concrete.

APPLICATIONS:

• Structural fastenings in cracked and uncracked concrete in indoor conditions.
• Formwork and fastening.
• Racking and shelving.
• Attaching railings, handrails and ledgers.
• Fastenings of steel beams, channels, boilers, signals, stadium seatings, façade substructures, etc.

Sell sheets, FAQ sheets and ICC-ES reports are available online at:
www.brightonbest.com/products

Learn More Online

Here

Click the Image Below to Download the Linecard

BBI U.S. ANCHOR TAPKING SD

MASONRY SCREWS / DURABLECOAT

• Miami-Dade County Approval.
• Durable Coat = 1,000 hour salt spray, providing superior corrosion resistance.
• Flat Head Phil.
• Indent HWH Head.
• Trim Head Phil: White, Bronze, and Silver.

TESTED FOR USE IN:

• Poured Concrete.
• Grout Filled Masonry.
• Hollow Masonry Substrate.

Sell sheets, FAQ sheets and Miami-Dade County Approval are available online at:
www.brightonbest.com/products

Learn More Online

Here

Click the Image Below to Download the Linecard

HOT DIPPED GALVANIZED FASTENERS

It’s been a long hard winter, that dock of yours needs new Bolts, Nuts & Washers.

A307 GRADE A ALL THREAD RODS

A307 GRADE B HEAVY HEX BOLTS COARSE

HEX BOLTS A307 GRADE A COARSE

HEX TAP BOLT A307 GRADE A

HEX LAG SCREW LOW CARBON

TIMBER BOLTS A307 GRADE A

SQUARE HEAD BOLT

CARRIAGE BOLTS A307 GRADE A COARSE

CARRIAGE BOLTS GRADE 5

A325 TYPE 1 HEAVY HEX STRUCTURAL BOLT

A325 TYPE 1 HEAVY HEX STRUCTURAL BOLT (USA)

USA A325 TC BOLT ASSEMBLY W/A563 DH HVY NUT & RD F436 WASHER MECH GAL

A563 GR.DH HEAVY HEX NUT, PLAIN (METAL KEG)

A563 HEAVY HEX NUT GRADE DH COARSE HDG/WAX (USA)

A563 HEAVY HEX NUT GRADE DH COARSE HDG/WAX/BLUE DYE (BOX)

HEX COUPLING NUTS, A563-A

HEX NUTS A194 / SA 194 2H HEAVY HDG & WAX (USA)

HEX NUTS A194 / SA 194 2H HEAVY HDG/WAX/BLUE DYE (BARREL)

HEAVY HEX NUTS A563 GRADE A COARSE

HEX NUTS COARSE LOW CARBON

HEX NUTS JAM COARSE LOW CARBON

SQUARE NUTS GRADE 2

ULTRAWEDGE, WEDGE ANCHORS, STEEL

USS FLAT WASHERS LOW CARBON

180 DIRECT TENSION INDICATOR WASHERS MGAL (FOR A-325)(USA)(INCH)

F436 ROUND WASHER USA

F436 STRUCTURAL FLAT WASHERS MED. CARBON

SQUIRTER WASHER MECHANICAL GALVANIZED (D.T.I. WASHER FOR A-325)

OGEE WASHER, CLASS 30 GREY IRON

REGULAR SPLIT LOCK WASHERS

ROUND MALLEABLE IRON WASHERS

ROUND PLATE WASHERS

SAE FLAT WASHERS LOW CARBON

SHEAR PLATE WASHER, MALL.

BRIGHTON-BEST EXPANDS STAINLESS LINE

Download the Line Card Here

BBI is the largest master distributor of fasteners in North America and is your best bet when it comes to Stainless Steel fasteners. BBI stocks Stainless Steel fasteners in all product groups - both INCH and METRIC.

Our offerings include Socket / Flat / Button & Low Head Cap Screws, Socket Shoulder Screws, Socket and Square Head Set Screws, Dowl Pins, Hex Head Cap Screws, Carriage Bolts, Lag Screws, Threaded Rods, Finished Hex Nuts, Flat & Spring Lock Washers, Nylon Insert and K-Lock Locknuts, Acorn Nuts, Machine & Self Tapping Screws plus Anchoring Fasteners and Rivets. Types handled are 304, 316, 410 and 416.

SAME DAY SHIPPING

ONLINE ORDERING

30 + WAREHOUSES

COMPETITIVE PRICING

Since 1998, Ironclad Performance Wear has been the premier brand in task specific work gloves. Born on the job site, our gloves were the first to emphasize performance in hand PPE by using a new approach in design and construction. This revolutionary approach to work gloves, using premium grade fabrics and a comprehensive fit system, resulted in gloves that are equally protective, durable and comfortable without compromise or equal. Countless protected hands over the years, and our ongoing research and development means that Ironclad’s work glove expertise is rivaled only by our expansive range of gloves which now protect hands all over the globe.

CHECK OUT IRONCLAD CONSTRUCTION GLOVES

DEMAND THE BEST. DEMAND IRONCLAD.

www.brightonbest.com

Top